Double-shaft shredder maintenance and care

Double-shaft shredder maintenance and care

1. Regularly check the equipment

During the use of the double-shaft shredder equipment, it is necessary to regularly check the operating status of each component to ensure the normal operation of the equipment. The specific details are as follows:

(1) Check the motor: Regularly check the insulation performance of the motor and the operating status of the driver. If abnormal, please deal with or replace the problematic parts in time.

(2) Check the cutter and bearing: Regularly check the condition of the cutter and bearing of the double-shaft shredder. If severe wear or failure is found, please replace it in time.

(3) Check the oil circuit: Regularly check the oil circuit, lubricating oil and lubrication points of the equipment. If necessary, please add oil or replace oil to ensure the normal operation of the equipment.

2. Clean the equipment

During the process of handling various wastes, the double-shaft shredder often produces dust and stains. The equipment needs to be cleaned regularly to ensure the hygiene and normal use of the equipment. The specific details are as follows:

(1) Clean the knife and knife holder: remove the knife and knife holder of the equipment, clean them thoroughly with detergent and brush, rinse them with water, and reinstall them.

(2) Clean the surface of the equipment: clean the dust and stains on the surface of the equipment and around the feed port and discharge port to ensure the normal use of the equipment.

3. Maintain the equipment

During the use of the double-shaft shredder equipment, it is necessary to regularly maintain it to extend its service life. The specific details are as follows:

(1) Regular maintenance of the equipment: Regularly maintain the equipment every six months or one year, check the various parts of the equipment, and maintain them reasonably to ensure the normal operation and service life of the equipment.

(2) Lubricate and maintain the equipment: Check the lubricating oil and lubrication points of the equipment, and regularly add or replace the oil to ensure the normal operation and service life of the equipment.

4. Precautions

(1) When using the double-shaft shredder, you should pay attention to its safety. It is forbidden to approach the feed and discharge ports of the double-shaft shredder at will to avoid danger.

(2) When using the double-shaft shredder, it must be operated in accordance with the prescribed method and must not be modified without permission to avoid equipment failure and damage.

(3) When cleaning the equipment and performing maintenance, pay attention to protecting the various parts of the equipment to avoid damage or loss. At the same time, when disassembling and repairing the equipment, it must be operated in accordance with the specifications to avoid unnecessary damage and danger.